Eoc Reapter a good accuracy_
#1
Posted August 04 2014 - 12:39 PM
Fred is sad hes not like the other robots
[12:43] <@ThirdEyE> skitzo1d = worst reaper NA
#2
Posted August 04 2014 - 12:47 PM
#3
Posted August 04 2014 - 01:17 PM
Check out my new short film Prebirth: The Eternal War! Check out my e-peen!
Need to find a mech guide_ Well, look here!
Intel Core i3 2120 @ 3.30 GHz | Corsair XMS3 8GB RAM | eVGA GTX 550Ti 1GB OC | Corsair CX600 PSU
#4
Posted August 04 2014 - 01:31 PM
#6
Posted August 04 2014 - 02:04 PM
Fred is sad hes not like the other robots
[12:43] <@ThirdEyE> skitzo1d = worst reaper NA
#7
Posted August 04 2014 - 02:15 PM
Accuracy of the weapon is Outstanding. Impact is subjective.
edit: explanation--a straight shot hits like a 8-truck pileup. moving it like a garden hose has about the same effect as the garden hose... gets the enemy mad, and not much more, unless you're laying mine traps, denial, etc, then you better have lotsa friends around, 'cause you are Way Too Close.
It hits precisely where you aim, close, mid, across map ranging. It can be devastating with the right pilot.
Or a piece of lame junk for a Spam shooter, or if you don't have "nerves of steel" (or eyeballs full of Cream Sherry).
Edited by EM1O, August 04 2014 - 02:28 PM.
Lingua-indigenae *=0=* Clans & Guilds *=||=* Which Mech_ *=X=* GPU Test *=W=* CPU Test *=O=* Dementia
#8
Posted August 04 2014 - 03:07 PM
EM1O, on August 04 2014 - 02:15 PM, said:
No it doesn't....
[13:14] <nonsiccus_work> uh oh
there's gravy in my keyboard
----------------------------------------------------------------------
[11:18] <+shosca> if you wanna play ar, go play zerker
[11:18] <Hyginos> and if you want to play zerker, go smc
[11:19] <someone> if you want to play sustain, please go and die in hell
#9
Posted August 04 2014 - 03:20 PM
Sylhiri, on August 04 2014 - 03:07 PM, said:
my fave is top of facility jump shaft thingy across to the happy hoppers on silo 2.
Lingua-indigenae *=0=* Clans & Guilds *=||=* Which Mech_ *=X=* GPU Test *=W=* CPU Test *=O=* Dementia
#10
Posted August 04 2014 - 03:44 PM
The farther back you go the more spread it has. The first puck will always go straight while the second and third curve to the left slightly (enough to be noticeable), the forth and fifth reach the top of the spread height and the 6th puck goes downward (you can't see it in the second picture because it's overlapping with the forth puck). Even close shots don't overlap each other, I guess the guns "recoil" would be the cause.
Honestly I think 30% is good enough accuracy. The gun really isn't made for only direct hits, you do purposely shoot the floor after all.
Edited by Sylhiri, August 04 2014 - 03:46 PM.
[13:14] <nonsiccus_work> uh oh
there's gravy in my keyboard
----------------------------------------------------------------------
[11:18] <+shosca> if you wanna play ar, go play zerker
[11:18] <Hyginos> and if you want to play zerker, go smc
[11:19] <someone> if you want to play sustain, please go and die in hell
#11
Posted August 04 2014 - 05:26 PM
1 or 2 of the pucks could go outside on an A class, but you'll get your money's worth on a fatboy. and i have no idea why i used 8 as a number...i can hear that six-cylinder ticky-tock, tick tick tock in my head right now.
i even came across last summer's marathon EOC repeater thread (right after it showed up in Hawken). what an awesome pile of .... eh. well....
i really gotta start playing HEAT a little more....
edit: oh! and the pattern you had_ it seems to be programmed in--mine were about the same, and "rotated" depending on the surface/angle of impact! spiffy, eh_ i do love dat EOC!
O
Edited by EM1O, August 04 2014 - 05:38 PM.
Lingua-indigenae *=0=* Clans & Guilds *=||=* Which Mech_ *=X=* GPU Test *=W=* CPU Test *=O=* Dementia
#12
Posted August 05 2014 - 12:45 AM
#13
Posted August 07 2014 - 12:49 PM
Whatever. I started out even worse!
It's great on lower level servers (what isn't). Definitely play the ground puck card. Especially with corner pokers.
Also on Seige great for extra DPS in front of or inside AA.
Use it like Windex, spray it everywhere and on everything.
#14
Posted August 08 2014 - 07:28 PM
#15
Posted August 09 2014 - 05:51 AM
Srs question
#16
Posted August 09 2014 - 08:56 AM
Alpha86, on August 09 2014 - 05:51 AM, said:
Srs question
That's correct. EOC R mines detonate after a few seconds. Keep in mind that when they do they can damage you.
Edited by TwentyFirstPilot, August 09 2014 - 08:57 AM.
Aspiring Professional Yolodriver
Amidatelion, on May 24 2014 - 01:36 AM, said:
comic_sans, on October 31 2014 - 05:50 PM, said:
#17
Posted August 09 2014 - 10:51 AM
As far as what percentage of accuracy_ Kind of a moot point with EOC as many times you will be shooting at the ground.
Try and group our pucks tight and when you are in a direct fight with someone you are gonna have to make judgement calls on when to try and hit them directly with pucks and when to lay them on the ground. Damage wise it is always better to hit the enemy directly with the pucks.
Corners are your friend, and your enemies end.
#18
Posted August 09 2014 - 11:27 AM
CounterlogicMan, on August 09 2014 - 10:51 AM, said:
That's also a judgement call, the tighter you group them the more chance the enemy will avoid them entirely. If you spread them out you have a higher chance of getting a hit but it does lower damage. In tight spaces you can get away with a tighter grouping, larger spaces your best bet is more spread for area control unless you know exactly the direction the enemy will be headed in (popping corners left and right).
[13:14] <nonsiccus_work> uh oh
there's gravy in my keyboard
----------------------------------------------------------------------
[11:18] <+shosca> if you wanna play ar, go play zerker
[11:18] <Hyginos> and if you want to play zerker, go smc
[11:19] <someone> if you want to play sustain, please go and die in hell
#19
Posted August 09 2014 - 12:52 PM
#20
Posted August 10 2014 - 07:57 AM
Flifang, on August 09 2014 - 12:52 PM, said:
Explain_
Aspiring Professional Yolodriver
Amidatelion, on May 24 2014 - 01:36 AM, said:
comic_sans, on October 31 2014 - 05:50 PM, said:
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users